The Trantec S4.16L is a UHF diversity lapel radio system complete with omnidirectional condenser tie-clip mic. Professional balanced output. Detatchable rear aerials. Run up to 16 systems simultaneously. Channel 70 or 38 available.
The Trantec S4.16 UHF system boasts a multi-function receiver, 16 selectable frequencies and the latest PLL quartz tuning technology, making it the ultimate choice when looking for a product that will address your demands now, and into the future.
The S4.16 has 16 selectable frequencies incorporating the existing 4 licence free Channel 70 frequencies, already being used in the S4.4, allowing the user to operate up to 12 frequencies together intermodulation free. The receiver has detachable antennae, allowing remote placement and the use of antenna distribution units for larger sets.
The S4.16 has a host of additional features including LEDs on the receiver showing Power On, AF Peak level, RF Level and Diversity Channel A or B. In addition, the diversity operation receivers have rear mounted detachable antennae and variable gain jack plug output.
The beltpack transmitter has a locking 3.5mm jack plug and its transmitter battery life is in excess of ten hours.
|S4.16RX-EA RECEIVER |
|RF Frequency Range: 606-61MHz (G3), 854-865MHz (EA) |
|16 Channel Capability |
|Audio Frequency Response: Handheld 80Hz-16kHz (+/-3dB), Belt pack 60Hz-16kHz (+/-3dB) |
|Audio S/N Ratio: >96dBA |
|Audio output: Variable to +10dBu via unbalanced 1/4" mono jack, +16 dBu via balanced XLR 3F |
|Display: 4 position RF bar graph, AF Peak (Overload), Diversity A/B |
|DC Input: 12V, 100mA |
|Dimensions: 35 x 213 x 98mm |
|Weight: Approx 580g |
|S4.16LTX-EA TRANSMITTER |
|16 Channel capability |
|Controls: Frequency select, On/Off switch, Lapel/Instrument select, Gain adjust |
|Indicator: Battery status LED |
|LP2 Lavalier microphone: Omni-directional back electret condenser |
|Operating voltage 9v @ <50mA |
|Operating time approx 10 hours |
|Power Output: Max 10mW |
|Connectors: Audio input via 3.5mm jack socket |
|Dimensions: 60 x 100x 30mm including belt clip |
|Weight: Approx 90g |
|Fully meets with requirements of ETSI 300-422/455, FCC part 74h |